Prior to the final release of the financial security, the developer shall provide the Township with one (1) Mylar and two (2) prints of the final as-built plan showing the following:

A.        Actual location of all concrete monuments which were set at all angle breaks, points of curvature and tangents around the perimeter of the total tract.  When the outside perimeter of a tract falls within or along an existing road right-of-way, then the right-of-way of that roadway shall be monumented at the above referenced points.

B.         Actual location of all iron pins or drill holes in curbs for all individual lot lines.

C.         Actual cul-de-sac radius.

D.        Actual horizontal and vertical location of cartway centerline versus right-of-way centerline.

E.         Actual location of floodplain by elevation and dimension from property line.

F.         Actual location and cross section of swales and accompanying easements.

G.        Actual horizontal and vertical location of storm water management facilities including type and size of storm drainage pipes.

H.        Detention basin:

            1.         Actual contours of the detention basin.

            2.         Actual outlet structure details including type, size and inverts of outlet pipes.

            3.         Actual elevation of the embankment and emergency spillway.

4.                  A table showing the stage/storage/discharge curve for the constructed conditions. 

5.                  A table providing a comparison of the approved design vs. the as-built discharge rates from all detention facilities.